Product Descriptions and Directions
PLATINUM
Evolution's PLATINUM 6 Year Graphene Ceramic Paint Coating is the ultimate solution for anyone looking for long-term protection and a flawless, high-gloss finish for their vehicle. Made with the latest technology, this coating creates a strong and durable layer on your vehicle's paint, protecting it from scratches, UV rays, acid rain, and other types of damage. This coating provides unparalleled protection and is designed to last for up to 6 years, making it a worthwhile investment for anyone who wants to keep their vehicle looking like new for longer. PLATINUM's hydrophobic and oleophobic properties also make it incredibly resistant to water, dirt, and other contaminants, making it easy to maintain and keeping your vehicle looking its best. What sets our PLATINUM 6 year coating apart is its ability to create a stunning, high-gloss finish on your vehicle's paint. This coating enhances the color and depth of your paint, creating a rich and vibrant finish that's sure to turn heads.
DIRECTIONS: Use a clean application pad (included) and dampen one side with the ceramic coating until it is wet, but not dripping. Coat one area or up to 4 square feet at a time, ensuring on each panel to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and have a rainbow appearance after approximately 1-2 minutes. (Time may be less in extreme heat and humidity locations)
After a minimum of 90 seconds, but not exceeding 3 minutes take a clean microfiber cloth and go back to the point where coating started and gently buff all the areas that have been coated to remove the excess residue. Ensure the buffing process is light and only excess residue is being removed. (This is also called leveling)
Flip the microfiber cloth over or use a second micro cloth for complete residue removal for a quality finish. Once you have finished buffing, repeat the process continuing as above.
TIP – If the product has been left on for too long and is difficult to remove and create a nice shine, re-wet the area with an application pad and instantly buff to a shine with a microfiber cloth. Do not allow to cure with streaks and rainbows!
DIAMOND
Evolution's DIAMOND 3 year ceramic coating is a top-of-the-line product that provides exceptional protection and a smooth, glossy finish for your vehicle. Made using hybrid ceramic elastomer technology, this coating creates a hydrophobic and oleophobic layer on your vehicle's surfaces, making them incredibly resistant to water, dirt, and other contaminants. The ceramic coating also provides exceptional durability and resistance to scratches, UV rays, and other types of damage. This means that your vehicle will stay protected and looking great for years to come, with minimal maintenance required. What really sets this ceramic coating apart is its incredibly smooth and slick finish. This coating creates a mirror-like surface on your vehicle, enhancing the depth and vibrancy of your paint while giving it a smooth and slick feel. Layer up for even more depth to your paint!
DIRECTIONS: Use a clean application pad (included) and dampen one side with the ceramic coating until it is wet, but not dripping. Coat one area or up to 4 square feet at a time, ensuring on each panel to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and have a rainbow appearance after approximately 1-2 minutes. (Time may be less in extreme heat and humidity locations)
After a minimum of 90 seconds, but not exceeding 3 minutes take a clean microfiber cloth and go back to the point where coating started and gently buff all the areas that have been coated to remove the excess residue. Ensure the buffing process is light and only excess residue is being removed. (This is also called leveling)
Flip the microfiber cloth over or use a second micro cloth for complete residue removal for a quality finish. Once you have finished buffing, repeat the process continuing as above.
TIP – If the product has been left on for too long and is difficult to remove and create a nice shine, re-wet the area with an application pad and instantly buff to a shine with a microfiber cloth. Do not allow to cure with streaks and rainbows!
MATTE
Evolution's Matte, Wrap & PPF Ceramic Coating is an advanced solution that provides unmatched protection for your vehicle's vinyl wrap, matte paint, and paint protection film. Made with state-of-the-art ceramic technology, this coating creates a hydrophobic and oleophobic layer on your vehicle's surfaces, making them incredibly resistant to water, dirt, and other contaminants. Unlike traditional coatings, this ceramic coating is designed to maintain the unique look and texture of your vehicle's wrap, PPF or matte paint. The coating provides long-lasting protection against UV rays, environmental contaminants, and other types of damage.
DIRECTIONS: Take a fresh application pad and dampen with the ceramic coating until it is wet, but not dripping. Coat one area or up to 2 square metres at a time, ensuring on each panel to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and have a rainbow appearance after approximately 30 seconds to 1 minute. After a minimum of 1 minute, but not exceeding 2 minutes take a clean microfiber cloth and go back to the point where coating started.
Gently buff all the areas that have been coated in order to remove the excess residue, until a uniform streak free appearance is achieved. Ensure the buffing process is light and only excess residue is being removed. Use a second micro fiber cloth for complete residue removal for a quality finish. Once you have finished buffing, repeat the process continuing as above.
TIP – If the product has been left on for too long and is difficult to remove, re-wet the area with an application pad and instantly buff with a microfiber cloth. Do not allow to cure with streaks and rainbows! a paragraph.
WHEEL
Evolution's WHEEL ceramic coating is engineered specifically for wheels and calipers. Unparalleled heat resistance and remarkable durability that surpasses industry standards. Our coating is designed to withstand extreme temperatures, ensuring optimal performance even under intense driving conditions. With its superior durability, it provides long-lasting protection against road debris, brake dust, and UV rays, keeping your wheels and calipers looking pristine. It also exhibits excellent chemical resistance, maintaining its integrity when exposed to cleaners, including iron remover and solvents. Applying and maintaining WHEEL ceramic coating is a breeze, making it accessible to both professionals and diy enthusiasts.
DIRECTIONS: Take a fresh application pad and dampen with the Wheel coating until it is wet, but not dripping. Coat one wheel at a time, ensuring on each wheel to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and have a rainbow appearance after 2-3 minutes. After a minimum of 2 minutes, but not exceeding 5 minutes take a clean microfiber cloth and go back to the point where coating started. Gently buff all the areas that have been coated in order to remove the excess residue, until a uniform streak free appearance is achieved. Ensure the buffing process is light and only excess residue is being removed.
Use a second microfiber for complete residue removal for a quality finish. Once you have finished buffing, repeat the process continuing as above.
TIP – If the product has been left on for too long and is difficult to remove and create a nice shine, re-wet the area with an application pad and instantly buff to a shine with a microfiber cloth. Do not allow to cure with streaks and rainbows!
TRIM
Our innovative flexible TRIM ceramic coating is specially formulated for plastic and rubber surfaces. Experience unmatched durability and hydrophobicity, transforming the way you protect and enhance these materials. Our advanced coating shields plastic and rubber surfaces from the elements, ensuring long-lasting protection against UV rays, harsh weather conditions, wear and tear. With its hydrophobic properties, water and other liquids effortlessly bead up and roll off, preventing damage and making cleanup a breeze. Applying is quick and hassle-free, allowing easy application by anyone.
DIRECTIONS: Take a fresh application pad and dampen with the Trim Coating until it is wet, but not dripping. Coat one area or up to 2 metres at a time, ensuring on each area to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and darken immediately on application. After a minimum of 30 seconds, but not exceeding 1 minute take a clean microfiber cloth and go back to the point where coating started.
Gently buff all the areas that have been coated in order to remove the excess residue, until a uniform streak free appearance is achieved. Ensure the buffing process is light and only excess residue is being removed. Use a second microfiber cloth for complete residue removal for a quality finish. Once you have finished buffing, repeat the process continuing as above.
TIP – If the product has been left on for too long and is difficult to remove and create the desired finish, re-wet the area with an application pad and instantly buff to a shine with a microfiber cloth. Do not allow to cure with streaks!
GLASS
Our Ceramic Glass Coating is a coating that cures onto your glass surfaces, providing excellent resilience and water resistance. Using advance hydrophobic (water repelling) polymer technology, that allows water beading to occur and thus flow off the glass while driving. Whether applied on windshields, mirrors, windows or sunroofs, this coating repels both rain and dirt, while maintaining a cleaner glass surface. This is especially helpful for new and young drivers, as it will dramatically improve visibility during wet conditions and rain. In colder temperatures, our coating assists in defrosting your windows at a much faster rate.
DIRECTIONS: Use a clean application pad (included) and dampen with the Glass Coat until it is wet, but not dripping. Coat one windowe ensuring to work horizontally, then vertically, for an even spread of product (also known as cross-hatching). The area should look wet and have a rainbow appearance after approximately 30 seconds to 1 minute.
After a minimum of 30 seconds, but not exceeding 1.5 minutes take a clean microfiber cloth and go back to the point where coating started. Now gently buff all the areas that have been coated in order to remove the excess residue, until a uniform streak free appearance is achieved. Ensure the buffing process is light and only excess residue is being removed. This is also known as leveling. Use a second microfiber cloth for complete residue removal for a quality finish.
TIP – If the product has been left on for too long and is difficult to remove and create a nice shine, re-wet the area with an application pad and instantly buff to a shine with a microfiber cloth. Do not allow to cure with streaks and rainbows.
Ceramic Sealant
Our Ceramic Sealant is a spray that uses advance silica based (SiO2) technology, giving it a self-cleaning ability, while still being easy to use. SiO2 or silicon dioxide is known as liquid glass that possess a large amount of surface tension preventing the water from bonding to the surface. This creates the characteristic of being extremely water repellent, strong, and self-healing. The water repellent technology allows for water beading to occur and thus create a self-cleaning film. This spray is safe to use on paint protection film, glossy, matte, coated and non-coated surfaces and will not only extend the life of your ceramic coating by but enhance the self-cleaning abilities, prolong its durability and aid in removing streaks.
Directions: Before applying ceramic sealant, make sure surface is clean, cool to the touch and out of direct sunlight. Shake before use
1. Spray a small amount of product onto the surface
2. Use a dry, clean microfiber towel to spread the product
3. Use a second microfiber towel to wipe dry
Auto Maintenance Shampoo
Evolution’s Auto Shampoo is a high-quality car cleaning solution designed to provide a deep, thorough clean without damaging your vehicle's delicate finishes. Formulated with a gentle, pH-balanced formula, it is safe to use on all types of exterior vehicle surfaces without causing any harm or degradation. Auto Shampoo is a must for keeping your vehicle looking its best. It provides a deep, thorough clean without causing any damage or harm to your vehicle's delicate finishes.
DIRECTIONS: For best results add 2oz to a pressurized foam canon filled with distilled water and use high pressurized water to create a rich foam coating. We recommend using a wash mitt to work the shampoo to the car's surface. Start from top of car and work your way down. Rinse off and dry with a soft, clean towel.
Auto Decontamination Shampoo
Evolution's Decon Shampoo is a high pH content car wash shampoo that produces rich thick foam when applied with a foam canon or wash bucket. It contains powerful surfactants that safely remove tough dirt and grime without stripping or dulling your vehicles surfaces. It is safe to use on most vehicle surfaces. It rinses easily and leaves a film-free high gloss shine every time. Evolution's Decon Shampoo strips waxes, sealants, and other contaminates preparing your vehicle's surface for polishing or coating.
DIRECTIONS: For best results add 2oz to a pressurized foam canon filled with distilled water and use high pressurized water to create a rich foam coating. We recommend using a wash mitt to work the shampoo to the car's surface. Start from top of car and work your way down. Rinse off and dry with a soft, clean towel.