Application Instructions for GraphX 5
Can Be Applied To:Paint, Glass & Wheels
The product cross-links to the surfaces that it’s applied to. Surface cleaning °reasing is an essential part of the process to ensure that there is no contaminationbetween the product and the surface to be protected.It is also important the surface has been prepared to the highest standard prior toapplying the coating as once applied, it will seal in the surface underneath so if marring,scratches, etc are present it is highly recommended paint correction is carried out priorto the applying the coating to bring the surface to the desired finish first.
Application EnvironmentApplied Outside – YesTemperature Range – 0°c – 35°cDo not apply in direct sunlight where possibleDo not apply when rainingInitial Curing – 30 minutesFull Curing – 24 hours
Application MethodEnsure the surface is clean, dry, degreased and to an acceptable appearance level(paint polishing / correction should may carried out where required).Dampen the application pad so that it is wet on approximately one third of the pad.The pad should be wet but not dripping.Apply using the cross-hatch method (see diagram) going first side to side across thesurface and then top to bottom to ensure an even spread of the GraphX 5 overthe area to be coated.
Allow the coating to sit for no more than 30 seconds and then take a clean, dry,microfiber cloth and buff the excess product from the surface until you have a smearfree finish.The surface should be very slick to the touch if applied correctly compared to theuncoated surface.
Product MaintenanceOnce the coating has been applied, do not wash for the first 24-48 hours.Only use pH Neutral cleaners on the coated surface, we recommend our pH NeutralSnow Foam & pH Neutral Shampoo. Always use a wash mitt and drying towel forcontact washes. The 2-bucket wash method should be used where possible to reducethe risk of marring and scratches during the washing process.
If the coating is well maintained you will see up to 12 months of protection before re-application is required.
Can Be Applied To:Paint, Glass & Wheels
The product cross-links to the surfaces that it’s applied to. Surface cleaning °reasing is an essential part of the process to ensure that there is no contaminationbetween the product and the surface to be protected.It is also important the surface has been prepared to the highest standard prior toapplying the coating as once applied, it will seal in the surface underneath so if marring,scratches, etc are present it is highly recommended paint correction is carried out priorto the applying the coating to bring the surface to the desired finish first.
Application EnvironmentApplied Outside – YesTemperature Range – 0°c – 35°cDo not apply in direct sunlight where possibleDo not apply when rainingInitial Curing – 30 minutesFull Curing – 24 hours
Application MethodEnsure the surface is clean, dry, degreased and to an acceptable appearance level(paint polishing / correction should may carried out where required).Dampen the application pad so that it is wet on approximately one third of the pad.The pad should be wet but not dripping.Apply using the cross-hatch method (see diagram) going first side to side across thesurface and then top to bottom to ensure an even spread of the GraphX 5 overthe area to be coated.
Allow the coating to sit for no more than 30 seconds and then take a clean, dry,microfiber cloth and buff the excess product from the surface until you have a smearfree finish.The surface should be very slick to the touch if applied correctly compared to theuncoated surface.
Product MaintenanceOnce the coating has been applied, do not wash for the first 24-48 hours.Only use pH Neutral cleaners on the coated surface, we recommend our pH NeutralSnow Foam & pH Neutral Shampoo. Always use a wash mitt and drying towel forcontact washes. The 2-bucket wash method should be used where possible to reducethe risk of marring and scratches during the washing process.
If the coating is well maintained you will see up to 12 months of protection before re-application is required.